Are you a Nook Tablet user and having some problems related to network connection? Don’t worry we will help in knowing the causes and their solution that will help you in solving your problem. You can also take help from Nook help in solving this issue.
If you are having a problem with your wireless network with your Nook Tablet, then it may be the issue of Wi-Fi or it may be the issue related to your tablet’s connection with the Wi-Fi signals.
If you are using your own Wi-Fi connection, then here are the ways to check if it is the problem with the connection:
• Check whether the Wi-Fi router is connected to the internet or powered up?
• Does your laptop or PC be able to see or communicate with the adapter?
• Is the internet service in working order? You can check this from your PC or laptop.
Now check the configuration of internet connection with your PC by troubleshooting it. Additionally, each wireless device has a setup screen and a built-in configuration, that you can access from your laptop or PC. These may be the possible solutions:
• Reboot your Nook Tablet.
• Restart the power of your router by pressing it for 10 seconds. This may help in fixing the problem that may have been cropped up in router’s internal memory.
• Now check the network administrator to see the whitelist of devices special entered and blacklist of the devices that have been blocked for that particular system if trying to connect with a secured connection. There might also be need of providing Nook tablet’s MAC address which is actually its unique identifier. To find your Nook tablet’s MAC address go to Settings > Device Info > About your NOOK. This will be the MAC address of your Nook tablet.
• If nothing works then take help from Nook Customer Service.
A Wireless Network is There but Not a Good Connection
Wi-Fi networks cover a very small area and sometimes it becomes difficult to determine the actual working area of the Wi-Fi system that you are using. Follow these steps that may help you in knowing the actual working area of the Wi-Fi network or you can use Nook Support for getting connect to your network;
• Click on the network that you want to connect and then click on the forget command. This command will erase the previous connection settings. Then click on the name of the Wi-Fi network from which you want to connect and see whether it’s working or not.
• In Wireless section, go to Settings > the name of the network discovered by Nook. Now check out the signal strength for the network at the right side of each name. It will be in 1 to 4 stacked curves. 4 lines mean strong signal strength and 1 line means week signal that may fade in or out.
• Now take your Nook tablet near to transmitter or Wi-Fi router. You have to ensure that no major metal pieces come in way to block the signal like steel desk, file cabinets or refrigerators. Sometimes signals are blocked by steel mesh in the walls.
Unable to Connect to Network Despite Being Seeing It
Most of the wireless networks use a security system so as to keep away the undesirable outsiders from using them. Usually, a key or a password is required and sometimes username is also needed for connecting to a network. Then you have to enter the key exactly like if the key is 5jHTYmo789JKne, then you have to enter as it is.
If you are using your wireless network at home or at the workplace and unable to connect with it with all your devices, then you must reset your Wi-Fi router to its default factory settings and reconfigure it with all the devices that are ready to be connected with the network. You can consult the instruction manual or take help from Nook Com Support.
The Nook tablet currently doesn’t support voice over internet service like Skype and Barnes & Noble has confirmed that it won’t also as it fully wants to concentrate on writing and reading.
No comments:
Post a Comment